Pellet Stove Furnace
Pellet stoves are available as freestanding units or fireplace inserts that can give your home the appearance of an authentic fireplace that burns wood. They are available as freestanding units or as fireplace inserts that can give your home the look of an old-fashioned wood-burning fireplace.
The auger transports pellets from the hopper to the combustion chamber, where they are burned to create heat. Sensors monitor the fire and can adjust its rate of operation to ensure your desired temperature in the room.
1. Energy Efficiency
Pellet stoves use renewable, non-toxic fuel made from compressed sawdust and other substances. They are typically removed from landfills, but can be used to provide a clean, efficient source of heat. As a result, they aid homeowners in reducing their energy consumption and reduce greenhouse gas emissions. Many people who use pellet stoves report that they recoup their initial investment in only few years by reducing their heating costs.
Pellets are stronger and more compressed than natural wood, which makes them more efficient to burn. They also produce less creosote than traditional wood-burning fireplaces. Furthermore, they are stored in plastic bags that keep out moisture and require less frequent cleaning.
Like other heating systems pellet stoves need to be properly measured and vented. A trained technician can evaluate your venting needs and space requirements to achieve the most efficient results.
When the hearth is installed, it is constructed to fit the space and the vent is installed through a pre-cut hole in the siding of your home. The vent is then installed on a side wall or through the roof, based on your preference and local regulations.
After the hearth and vent are completed and the stove is ready to be plugged in and turned on. Some manufacturers provide the option of a remote control to make it simple to start and keep the fire going, while others provide additional sensors to monitor combustion and airflow as well as flue temperatures and pressure. If the system is able to determine that it needs more pellets or less, it signals to the auger to speed up or slow it down in line with the needs.
All stoves come with a storage container that can accommodate between 35 and 130 pounds of pellets. The size of the hopper determines how often you'll need to refill your stove. Larger hoppers permit longer time periods before refills is required. A grille draws air out of the room, passes it through the heat exchanger and blows heated air through the living area through convection. A grate or auger distributes the pellets, while an under-sink pan is used to collect any burned ones, along with the combustion residue.
Although pellet stoves are more efficient than wood-burning stoves, they're not as efficient as natural gas furnaces or electric heaters. Electric components that drive motorized parts of stoves require electricity. This could be an issue in the event of a power outage, though backup systems such as batteries and generators are available.
2. Low Maintenance
Pellet stoves can be extremely efficient, but they require some attention to run correctly. Cleaning your stove and exhaust vent on a regular basis will stop the accumulation of harmful creosote. This can cause a fire or explosion that can damage your stove or even your home.
A pellet stove is made up of natural particles that are compressed (such as kernels, nutshells of corn or small pieces of scrapwood) made from wood or other substances. The pellets are introduced into the combustion chamber by an auger powered with electricity. The speed at which pellets are pumped into the burner is controlled by the thermostat you set. The fire can be kept roaring or reduced or even snuffed out depending on the temperature you set. The ash will be disposed in an empty ash tray underneath the burner. It is easily removed and then disposed.
Pellets are made from byproducts of wood processing which would otherwise be discarded. They are a renewable source and emit less particulates than traditional wood-burning appliances making them a cleaner heating source. The amount of carbon monoxide, carcinogens, and other harmful chemicals produced from pellet stoves is far lower than with newer EPA-certified wood stoves.
Due to the low emission they produce, these stoves don't require to be vented through chimneys as traditional wood stoves, but they must be properly vented through a wall or an exterior structure. Pellet stoves are equipped with flue ports that are located on the rear or top of the appliance. They are connected to a ventpipe which extends out the house.
One drawback of a pellet stove is that you must purchase or store enough pellets to last the winter time. On average, owners of pellet stoves use three tons of pellets throughout the course of the winter at $200 per ton. The expenses can add up however they are much less expensive than buying firewood and transporting it to the wood-burning fireplace or stove. Make sure you buy enough pellets to ensure that your stove can function throughout the coldest winter months and you have a suitable place to store them (preferably cool, dry and off the ground).
3. Reduce Carbon Footprint
Pellet stoves make use of renewable biomass fuel to create heat, thus reducing the dependence on finite fossil fuels. This reduces carbon footprints as well as diversifying the sources of energy for homes.
Even the newest woodstoves that are EPA certified emit considerably less than pellet stoves. Emissions from pellet stoves are also significantly lower than those of gas furnaces. Pellets are made from compressed sawdust, bark, and other lumber leftovers and can also comprise different materials like soybeans, corn, nutshells, cherry pits, and agricultural waste. When burned, they emit less particulates (leading to respiratory problems and allergies) carcinogens, carbon monoxide, and nitrous oxides.
The feed system is the major difference between pellet stoves and wood stove. Pellet stoves have hoppers which hold the pellets. When image source or sensors indicate that the room requires heating, the auger is turned and the pellets are fed into the combustion chamber where they burn and generate heat. The combustion chamber is pushed through a heat exchanger which transfers the heat to the blower before releasing it into the room. This process results in low emissions and no creosote accumulation.
After the hopper has been empty, a cyclone removes the ash and places it in an ash pot. The stove is equipped with a fan that circulates heated, clean air into the room. Most pellet stoves require minimal maintenance and have a large viewing space for you and your family members to enjoy the flames.
The quality of pellets is the primary factor that affects pellet stove emissions. ventless pellet stove -quality pellets will produce more emissions. When choosing your pellets ensure that they're certified to meet certain standards and don't contain other ingredients such as urea or petroleum products. Also, look for a manufacturer that has a warranty and will repair or replace parts in the event of a problem. Some states offer homeowners an incentive to pay taxes in the event that they decide to go even greener. This is a great opportunity to reduce the initial cost of this type of stove and make it more affordable to install.
4. Reduced Noise
Pellet stoves emit very little smoke and emissions when compared to wood burning fireplaces. ventless pellet stove is used to distribute heat more evenly in the room. This feature is one reason why pellet stoves require less maintenance than wood stoves. While wood stoves have to be cleaned regularly of dust and chemicals pellet stoves require the use of a special metal vacuum cleaner for routine cleaning.
Many manufacturers have designed their stoves to ensure that they are easy to set up and operate as well as maintain. Their appliances are available in various styles that complement the interior decor of your home. Some include a programmable thermostat remote control, as well as WIFI apps that let you monitor and manage your stove from anywhere in the world.
Most pellet stoves come with an enormous fuel hopper that can hold between 35 and 130 pounds of pellets. The pellets are then pumped into the combustion chamber via an auger. The speed at which pellets are fed to the burner determines how hot the fire is and the heat output. The hopper can be filled with hardwood pellets (from dense wood species like oak and hickory) or softwood pellets (from pine and fir). A lot of stoves can use biomass pellets made of corn and switchgrass. This is a green option.
Since pellet stoves burn an environmentally friendly fuel, they emit less smoke than conventional wood-burning fireplaces and require fewer maintenance. They also do not require a chimney, making them a much more suitable choice for new constructions or retrofits.
In contrast to wood stoves, which require regular maintenance to be free of creosote as well as other chemicals, pellet stoves only require periodic inspections for proper operation and maintenance. Depending on the model, this may include regular inspections and cleaning of the accumulation of ash or "clinker," as well as the motor and fan. Your appliance dealer can provide the proper procedure for your specific brand and model. He can also assist you to determine the right fuel for your stove and provide information on storage and safety.